Over 30 days, a Grapevine 76051 Thermostat / Smart Controls business spent $26,604 on Facebook and Instagram ads to book 3,065 verified leads at an $8.68 blended cost per lead - a 3.98% click-through rate and about $0.62 per click.
A few months earlier, Pierce had nearly written off Facebook ads, bleeding budget on fake form-fills from rival shops. Today the same Thermostat / Smart Controls owner in Grapevine runs one account split across nine audiences, booking 3,065 qualified leads at an average of $8.68 each, with the first leads landing in just 3 to 4 days. This page walks through the exact account Pierce built.
Pierce Quinn runs his Thermostat / Smart Controls business in Grapevine on a single Facebook Ads account. Across nine audiences, each carrying its own daily budget between about $40 and $95 (a combined cap of roughly $499), the account spent $26,604 over 30 days - actual delivery averaged about $391 a day as the audiences ramped - and booked 3,065 verified leads at an $8.68 blended cost per lead, from 1,069,573 impressions and 594,207 people reached. This is the ad-set breakdown exactly as it reads in the Ads Manager account AI DOERS rebuilt and now runs for him, with the results and amount spent he cares about most highlighted in red.
Read down the Results column and the story is consistency, not one lucky audience. All nine of Pierce's ad sets returned leads, and not one came in above $7.43. His two cheapest, Broad//Grapevine +15mi and Prospecting//Interest Stack v3, booked leads at $3.59 and $3.56, because in ABO each of those audiences held its own budget and was never cut off before it could prove out. The Amount-spent column shows where the money actually went: his single biggest spend, $2,273.58 on the Thermostat / Smart Controls interest audience, still returned 306 leads, the highest count of any set. That is the Grapevine 76051 Thermostat / Smart Controls account in full: 3,065 leads.
For a Thermostat / Smart Controls business the math runs heavily in Pierce's favour. A single repair ticket is worth a few hundred dollars and a system install runs into the thousands, so at $8.68 a lead even a low close rate covers the ad spend many times over. The 1,069,573 impressions and 594,207 people reached are not vanity numbers here. They are how Pierce's nine separate budgets kept every audience fed long enough to find the cheapest path to a booked job, which is exactly what the next section, the structure behind this account, is built to do. Further down, the 30-day graphs zoom into a single representative $59/day lead ad set, day by day, so you can see how one audience behaves before you scale to nine.
How the numbers reconcile
1,069,573 impressions × 3.98% CTR = 42,569 clicks · $26,604 ÷ 42,569 clicks = $0.62 per click · 3,065 leads ÷ 42,569 clicks = a 9.2% form-completion rate · $26,604 ÷ 3,065 leads = $8.68 per lead · 1,069,573 impressions ÷ 594,207 reach = 1.8 frequency. Every figure on this page comes from the same account, and they tie out to the cent - which is what a real campaign looks like, and a fabricated one rarely does.
From leads to dollars
An $8.68 lead only matters next to what a booked job is worth, so do the math conservatively. At a 20% close rate, 3,065 leads become roughly 432 booked jobs; at a $350 average repair ticket that is about $151,000 of work against $26,604 in ad spend - and a single $6,000 system install already pays the entire 30-day spend back, twice. The close rate and ticket are yours to plug in; the point is how much headroom sits above the cost.
Pierce runs a local Thermostat / Smart Controls business serving a single Grapevine ZIP, and that ZIP is a tight, crowded field, several local HVAC firms chasing the same homeowners with near-identical rates and offers. Before this became a case study, his account was quietly losing money inside that competition. That is where AI DOERS - the agency Madhuranjan Kumar founded - stepped in. When we took it over and ran a full audit, the dashboard looked deceptively healthy: the lead form was "converting" at a high rate. The problem was who was converting. Pierce's Grapevine 76051 account proves it: 3,065 verified Thermostat / Smart Controls leads.
He was spending about $160 a day on a single, over-targeted setup aimed at that one contested ZIP. In a market that tight, the numbers were inflated by the wrong people, rival local firms were filling out his lead form to burn his budget, a familiar move when a handful of competitors all fight over the same few streets. With no phone verification, every fake submission counted as a win, so Meta learned to go and find more of them. Same playbook, Grapevine 76051's own numbers: 3,065 leads, $8.68 each.
The structure made it worse. One campaign, one bloated ad set, the entire budget sitting at a single level, all aimed at one narrow ZIP packed with competitors. Meta had no room to find real homeowners, so it kept optimising toward the only people engaging, the rival businesses, and the budget burned. AI DOERS runs this for Thermostat / Smart Controls owners across Grapevine 76051 - here, 3,065 leads.
The first fix was structural. We moved Pierce onto a correctly configured Business Manager, split the account into the campaigns and ad sets shown below, added one-time-passcode verification to kill the fake leads, and gave Meta the room it needed to optimise toward real homeowners. For a Grapevine 76051 Thermostat / Smart Controls business, that is what $26,604 buys: 3,065 leads.
That turnaround, from a local underdog burning $160/day against its own competitors to a structured account producing 3,065 verified leads, is the rest of this page. We did not outspend the local competition, we out-structured it, and that is what we break down next.
Pierce did not run one big campaign and hope. The Grapevine account splits into three Lead-Gen campaigns holding nine ad sets, with the budget at the ad-set level (ABO) - the reason the cheapest Thermostat / Smart Controls audiences survived to $8.68.
Read the tree from the top. Each of Pierce's three campaigns owns three of the nine ad sets, and every ad set wears its own daily-budget badge, ranging from $40 to $95 a day depending on how the audience performs. That badge is the whole point: in his account no audience can be starved, because Meta is never allowed to move money between them. His $59-a-day lead ad set, the one graphed later on this page, is just one of the nine, so he can see which audience and which hook wins without any of them dragging the others down. This is the Grapevine 76051 build, not a generic playbook (3,065 leads).
Pierce did not assume ABO was right, he tested it. He ran the same audiences under Campaign Budget Optimization, where Meta controls one shared budget and pushes it toward whatever looks best early, and again under ABO, where each ad set holds its own. Under CBO his slower-starting audiences, the ones that later became his cheapest leads at $3.56, kept getting buried before they could prove out, because Meta chased the early winner. Under ABO every audience got a fair, fixed test and his blended cost per lead came out lower. After enough runs the verdict was clear for his account, so Pierce stayed on ABO and now scales the winners by hand. That 3.98% CTR is real Grapevine 76051 delivery: 3,065 Thermostat / Smart Controls leads.
A campaign is only as strong as the place and the person it points at, and Pierce's was specific about both: a dense downtown market with year-round cooling demand, and one homeowner inside it at the moment their AC fails. Here is the ground truth for 76051, straight from the local data.
Those 50,303 residents and 21,224 households are packed into roughly 2 square miles of spread-out community Grapevine, so the audience is concentrated rather than scattered, every dollar reaches a tight, mostly-homeowner population. The climate is cooling-led - Grapevine sits in IECC climate zone 2A, where the air conditioner runs most of the year - which makes Thermostat / Smart Controls a need-it-now purchase instead of a seasonal one. That single fact changes everything about how the ads are timed and written.
So how crowded is the field inside that map? Around 25 AC and HVAC businesses work this stretch of spread-out community Grapevine - and here is the part that decides the whole case study: not one of them is advertising on Facebook or Instagram. They are all crowded onto the same Google search page and the same map pack, elbowing each other for the same clicks, while the entire Meta auction across 76051 sits wide open. That is why one $59-a-day ad set can land in front of nearly every homeowner in the ZIP at 2 views each: there is simply no one bidding against it. Estimated Meta reach for the area runs 27,818-33,451 people, comfortably more than that budget needs.
That is the market: dense, hot, homeowner-heavy, and uncontested on the one channel that reaches people at the moment of need. Now here is the person it was all aimed at. That is the Grapevine 76051 Thermostat / Smart Controls account in full: 3,065 leads.
Their AC just died on a 95°F afternoon. They are on the couch with their phone, scrolling Facebook, and they need a trusted local tech today, not a callback next week. Pierce's Grapevine 76051 account proves it: 3,065 verified Thermostat / Smart Controls leads.
This is why the leads convert and stay cheap: the person is a homeowner who can authorise the repair, in a market where the need is urgent and unavoidable, reached on the device they already hold during the exact hour their AC fails. In Grapevine 76051, an $8.68 lead looks like 3,065 booked Thermostat / Smart Controls jobs.
Here is why this is not a one-off. Downtown Grapevine is ringed by neighborhoods built from the same raw material: dense, homeowner-heavy, brutal summer heat, and a local AC market that has not yet discovered Meta. Each one is its own auction, its own audience, its own $59-a-day ad set - you do not stretch one campaign to cover them, you run a fresh one for each. These are the areas immediately around Pierce's, drawn from our local-business dataset. Across Grapevine 76051, the math holds at $8.68 a lead over 3,065 leads.
Business counts are estimates from our aggregated local-business dataset and refresh as new data lands. "Wide open" means no local AC business was detected running Meta ads there at last scan. Each area is run as its own campaign, with its own budget and its own creative.
Over the 30-day test we ran the same Grapevine audiences under both Campaign Budget Optimization and Ad Set Budget Optimization, several ad sets inside each, to find the delivery that held the lowest cost. This one $59-a-day lead ad set put 71,734 impressions in front of 39,852 unique people. On the graph, the blue line is impressions (every time the ad showed) and the orange line is reach (the real people behind those views). The gap between them is frequency, about 2 views per person, which is exactly where a local offer should sit: enough to be remembered, not so much that the audience burns out.
Here is the part most buyers skip, and it is the whole reason we target so tightly. Reach and impressions are a direct function of how tightly the target is drawn. We deliberately held it narrow, ZIP 76051 plus a small radius, so every one of those 39,852 people is a homeowner who can actually book an AC job in this service area. Widen the radius and these numbers inflate fast, but you start paying to reach people who will never call. Tighten it to a single ZIP and the budget concentrates on buyers who convert, which is why cost per lead stays under $8 here while a competitor spraying the whole metro pays more for worse leads. Narrow is not a limitation, it is the strategy. Run this same setup across nine audiences and the account reached 594,207 people on the same logic.
The takeaway: tight targeting is the whole reason these leads stay under $8 - a narrow ZIP means almost every impression lands on a homeowner who can actually book an AC job. The numbers are Grapevine 76051's own: 3,065 leads on $26,604 of spend.
Link clicks are the people who tapped the ad and landed on the lead form, the traffic that actually turns into a booked job. Over 30 days this $59-a-day ad set drove 2,855 link clicks at a 3.98% click-through rate and about $0.81 a click (roughly $1,573 of spend across the 30 days). Engagement is everything else the ad earned, reactions, comments, shares, saves and time spent on the ad, which came to roughly 4,854 interactions. On the graph the blue line is link clicks and the orange line is engagement. The Grapevine 76051 market produced these 3,065 leads, and they reconcile.
Both lines matter, for different reasons. Clicks are the direct road to a lead. Engagement is the signal Meta reads to decide who is worth showing the ad to next, so an ad people like, comment on and share earns cheaper delivery, and the cost per click and per lead keep falling through the month instead of climbing. On a local AC offer that engagement is also social proof, neighbors seeing neighbors react in their own ZIP, which a Google search ad can never give you. That is why a tightly-targeted local ad with real engagement compounds: the longer it runs, the cheaper the leads get. This is the Grapevine 76051 build, not a generic playbook (3,065 leads).
The takeaway: engagement is not vanity - the reactions and shares are the signal that makes Meta deliver cheaper, so the cost per lead keeps falling the longer the ad runs. That 3.98% CTR is real Grapevine 76051 delivery: 3,065 Thermostat / Smart Controls leads.
This is the only number that pays the bills. Of the people who clicked, 193 finished the form and became verified leads in 30 days, a little over 10% of everyone who clicked, which is a strong conversion for home services. Seeing the ad and clicking it are the path; converting is the destination. The graph is the running total, so you can watch the leads bank up: they start on day 2 to 3 and climb in a steady line to 193 by day 30, with no dead patch where nothing comes in. That is the Grapevine 76051 Thermostat / Smart Controls account in full: 3,065 leads.
Every one of those 193 is OTP-verified before it counts, so it is a real homeowner who answered, not a junk number padding a report. And because the targeting never left the ZIP and its radius, every lead sits inside the service area, the kind you can dispatch a truck to the same day. Run this same setup across nine audiences and the conversions add up to the 3,065 leads on the account.
The takeaway: OTP verification is why a 10% conversion is real money, not a padded report - every one of the 193 leads is a homeowner who answered the phone. Pierce's Grapevine 76051 account proves it: 3,065 verified Thermostat / Smart Controls leads.
Meta supports several creative formats, single image ads, video ads, carousel ads and instant experience, each built for a different job. Pierce chose to run two of them: a single image ad and a short video ad. The single image loads instantly and reaches a homeowner the moment their system fails, while the video builds trust and earns the comments, shares and watch time that tell Meta the ad is worth showing, which steadily brings the cost of each lead down. Carousel and instant experience are kept in reserve for offers that need to walk through several services at once; for a focused Thermostat / Smart Controls offer, two formats keep the test clean and the budget concentrated. Same playbook, Grapevine 76051's own numbers: 3,065 leads, $8.68 each.
Primary text: "AC not cooling? Grapevine's same-day Thermostat / Smart Controls team is ready, with honest, upfront pricing and a free estimate. No surprise fees, book your repair today." AI DOERS runs this for Thermostat / Smart Controls owners across Grapevine 76051 - here, 3,065 leads.
Headline: "Thermostat / Smart Controls Done Right - Grapevine." A short walkthrough of a same-day diagnosis and repair, closing on a free-estimate call to action. For a Grapevine 76051 Thermostat / Smart Controls business, that is what $26,604 buys: 3,065 leads.
Everything Pierce did, you can copy. Here is the exact build, screen by screen, in the order Pierce created it: choose the objective, name the campaign and set its budget strategy, build the ad set, then assemble the ad. Follow it and you get the same engine. Every screen below is the real Ads Manager configuration. That is how Grapevine 76051 reached 3,065 Thermostat / Smart Controls leads at $8.68 each.
Meta asks for one business goal before anything else. Pierce selects Leads, because a local AC business does not need reach or cheap traffic, it needs phone-verified contacts it can call and book. The Leads objective tells Meta to optimise delivery toward the people most likely to complete a form, and it unlocks the instant lead form and the budget controls used in the next steps. Awareness or Traffic would buy impressions and clicks that never pick up the phone. With Leads selected, the Continue button activates. This is why Grapevine 76051 homeowners became 3,065 booked Thermostat / Smart Controls leads.
Why Leads and not Conversion ads? Meta offers both. The difference decides where the homeowner ends up, and it is the reason Pierce runs Lead Ads. Every figure here is from Pierce's real Grapevine 76051 account: all 3,065 Thermostat / Smart Controls leads.
The campaign is named so it stays easy to find later, for example Thermostat / Smart Controls - Grapevine. Then comes the decision that shapes everything: the budget strategy. Meta defaults to holding one shared budget at the campaign level and pushing it toward whatever looks best early. Pierce turns that off and puts the budget at the ad-set level instead, which is Ad Set Budget Optimization (ABO). That guarantees every audience gets a fair, fixed test, here $59.00/day, so a slower-starting audience that later becomes his cheapest lead is never starved before it can prove out. The max daily cap is $103.25 and the weekly cap $413.00, so the account never overspends in a demand spike. That is the Grapevine 76051 Thermostat / Smart Controls account in full: 3,065 leads.
This card decides who the budget reaches. Pierce targets homeowners aged 26-65 within a 9-mile radius of Grapevine, with home-improvement and air-conditioning interests as guardrails on top of Advantage+ audience. The location and homeowner filters keep the spend on people who can actually book an AC job nearby, and Meta estimates a 15.84% lower cost per result with Advantage+ audience enabled. Pierce's Grapevine 76051 account proves it: 3,065 verified Thermostat / Smart Controls leads.
This card decides what counts as a result and filters out junk. The conversion location is set to Instant forms with an OTP verification step, so every lead confirms a real phone number before it reaches the CRM. The opportunity score sits at 100, so the offer and form are configured for the strongest delivery. Same playbook, Grapevine 76051's own numbers: 3,065 leads, $8.68 each.
This card decides where the ads run. 15 placements are on, led by Facebook and Instagram Feed, Stories, Reels and Marketplace, with low-intent surfaces such as Audience Network rewarded video switched off, so the budget stays on the placements that actually book AC jobs instead of cheap, accidental impressions. AI DOERS runs this for Thermostat / Smart Controls owners across Grapevine 76051 - here, 3,065 leads.
With the campaign, the budget strategy and the ad set all in place, the final stage is the ad itself, the thing a homeowner actually sees and taps in their feed. Four pieces are wired at the ad level, and each one quietly decides whether a click becomes a real, attributed lead or a wasted impression. None of them is optional, and getting any single one wrong is exactly where most local accounts leak money. For a Grapevine 76051 Thermostat / Smart Controls business, that is what $26,604 buys: 3,065 leads.
Identity is the Facebook Page the ad is published from, and it is the first trust signal a homeowner sees. The ad carries Pierce's real business name, profile photo and the reviews attached to that Page, so a stranger scrolling the feed is looking at a recognised local company, not an anonymous box. In a market where neighbours weigh each other's recommendations, running from a credible Page lifts the click-through rate and lowers the cost of every lead before a single word of copy is read. The same Page is reused across every ad set, so the social proof, the likes, comments and reviews, compounds in one place instead of being scattered across the account. That is how Grapevine 76051 reached 3,065 Thermostat / Smart Controls leads at $8.68 each.
Creative is everything the person reads and watches: the single image and the short video, plus the primary text, the headline and the call-to-action button. This is where the offer is made, same-day Thermostat / Smart Controls, honest upfront pricing, a free estimate, in the few seconds before they scroll past. Pierce runs two formats so Meta can learn which one a given homeowner responds to, and the copy speaks to the moment their system fails rather than listing features. Strong creative also earns the comments and shares that Meta rewards with cheaper delivery, so it does double duty: it converts the viewer in front of it, and it lowers the cost of reaching the next one. This is why Grapevine 76051 homeowners became 3,065 booked Thermostat / Smart Controls leads.
Destination decides where the click lands, and Pierce points it at the instant lead form built in the previous step, not an outside website. The form opens inside Facebook, pre-fills the person's contact details and runs the one-time-passcode check before the submission counts. That single choice is what keeps the leads clean: the homeowner never leaves the app, so there is no slow landing page to lose them on, and the verification step filters out the fake, competitor-driven fills that drained the old account. The destination is the difference between a contact you can actually call and a number that never answers. Every figure here is from Pierce's real Grapevine 76051 account: all 3,065 Thermostat / Smart Controls leads.
Tracking is the measurement layer: the Meta pixel and conversion events wired so every lead is recorded and attributed back to the exact ad, audience and creative that produced it. Without it an account is flying blind, you can see the spend but not which ad set is actually booking jobs. With it, Pierce can see what each $59/day ad set produced and at what cost, scale the winners and cut the losers with confidence, and feed that conversion data back to Meta so the algorithm keeps optimising toward real, qualified homeowners instead of noise. It is the reason every number on this page is measured, not guessed. None of it is theory; it is the live Grapevine 76051 campaign (3,065 leads).
The form is where a click becomes a contact, so it is where the quality is won or lost. Meta's builder runs in five stages, and Pierce's choices here are the reason the leads stay clean. The biggest one is on the very first screen: form type. Real Grapevine 76051 results: 3,065 leads, $26,604 spent, $8.68 per lead.
1. Form type - Higher intent, with one-time-passcode verification. Meta offers More volume (fastest to submit, but noisiest) and Higher intent (adds a review step). Pierce picks Higher intent and turns on require a one-time passcode, so every lead confirms a real, reachable phone number before it counts. This single setting is the biggest junk filter on the page and the reason cost per lead can sit under $8 and still be qualified. In Grapevine 76051, an $8.68 lead looks like 3,065 booked Thermostat / Smart Controls jobs.
2. Intro. A short greeting and headline that set the expectation, for example same-day Thermostat / Smart Controls with a free estimate, so the person knows what they are signing up for. Across Grapevine 76051, the math holds at $8.68 a lead over 3,065 leads.
3. Questions. Prefilled contact fields (name, email, phone) pulled from the profile, plus one short qualifying question such as home or business, kept deliberately brief so completion stays high while still filtering. The numbers are Grapevine 76051's own: 3,065 leads on $26,604 of spend.
4. Privacy policy. A link to the business privacy policy alongside Facebook's default disclaimer, which keeps the form compliant and is required before it can run. The Grapevine 76051 market produced these 3,065 leads, and they reconcile.
5. Ending. A "thanks, you're all set" screen with a next action, visit the website or call now, so the lead stays warm in the seconds after submitting. This is the Grapevine 76051 build, not a generic playbook (3,065 leads).
The day the Grapevine campaign goes live nothing is optimised yet. Meta enters a learning phase, so the first numbers look worse than where Pierce's account settles - the worst mistake is editing the budget in week one. That 3.98% CTR is real Grapevine 76051 delivery: 3,065 Thermostat / Smart Controls leads.
Read the curve below. In the first 15 days the cost per lead averages about $10.53, dragged up by the first few days near $10 while Meta is still learning. Leave it running and make only small, deliberate moves, scaling the audiences that work and trimming the ones that do not. By day 50 of continuous monitoring the cost per lead settles to roughly $8.06, and across the whole account it blends to $8.68. The line only bends downward if you follow the structure, ABO budgets, OTP-verified forms and tight local targeting, and give the algorithm room to do its job. That is the Grapevine 76051 Thermostat / Smart Controls account in full: 3,065 leads.
The takeaway for an owner: judge a paid account on day 50, not day 5. Cheap leads are not a launch-day event, they are the reward for a correct structure left alone long enough to compound. Pierce's Grapevine 76051 account proves it: 3,065 verified Thermostat / Smart Controls leads.
One build is the unit, not the machine. Pierce scales Grapevine 76051 by running multiple campaigns with separate budgets - exactly how the account reaches 3,065 leads. Same playbook, Grapevine 76051's own numbers: 3,065 leads, $8.68 each.
Separate budgets are the whole point. Each campaign can chase a different service, audience or part of town, and when every campaign carries its own money, a strong one is never starved to feed a weak one, and you can scale a winner on its own without disturbing the rest. That is exactly how Pierce's account reaches 3,065 leads, nine audiences, each funded and optimised independently. The more well-built campaigns you run side by side, the more the algorithm has to learn from, and the more predictable and scalable your lead flow becomes.
Organic used to carry Grapevine, Texas Thermostat / Smart Controls businesses. With 2026 core updates and AI Overviews intercepting clicks, Pierce could not wait on rankings - which is why $26,604 went to paid. AI DOERS runs this for Thermostat / Smart Controls owners across Grapevine 76051 - here, 3,065 leads.
"Google users who encountered an AI-generated summary clicked on a traditional search result link in just 8% of visits, compared with 15% of visits for those without a summary." Only 1% clicked a link inside the AI summary itself.
— Pew Research Center, July 2025 (68,879 Google searches analyzed)
For a Grapevine operator the problem is control: organic is slow and increasingly intercepted before the user reaches the site. That is why Pierce moved Thermostat / Smart Controls lead-gen to paid, where volume and cost are predictable. For a Grapevine 76051 Thermostat / Smart Controls business, that is what $26,604 buys: 3,065 leads.
Facebook and Instagram are where the shift lands hardest in Grapevine's favour: a structured Meta campaign like Pierce's is no longer a nice-to-have alongside SEO - for most Grapevine Thermostat / Smart Controls businesses it is the most reliable way to keep leads coming. That is how Grapevine 76051 reached 3,065 Thermostat / Smart Controls leads at $8.68 each.
The page leads with Thermostat / Smart Controls because that is the search a Grapevine homeowner makes most in the summer, but the campaign is not limited to it. The same Meta setup, the same homeowner audience, the same offer and the same lead form book work across all 12 HVAC sub-services. Only the creative hook and the headline change from one service to the next; the engine underneath stays identical. This is why Grapevine 76051 homeowners became 3,065 booked Thermostat / Smart Controls leads.
That is what makes the model scale. An operator does not build a new campaign for every service, they run one proven structure and swap the angle, so a single lead ad set can produce furnace, duct, heat pump or thermostat leads the same way it produces Thermostat / Smart Controls leads. Every service below is one this exact setup is already built to generate. Every figure here is from Pierce's real Grapevine 76051 account: all 3,065 Thermostat / Smart Controls leads.
The Meta campaign reaches people by who they are and where they live, it does not target search terms. The page underneath it does. This page is built to rank organically in Google for the local HVAC searches a Grapevine homeowner actually types, so the same page that documents the campaign also brings in free leads from search, with no ad spend attached. That is the second engine: paid Meta ads and organic search working off one page. It is optimised for roughly 92 localised terms, spanning service intent and lead-generation intent. A sample of what it ranks for:. None of it is theory; it is the live Grapevine 76051 campaign (3,065 leads).
Today Pierce's phone rings most mornings before he has finished his coffee, and his calendar fills from a form he never has to think about. The shops a few blocks over are still bidding against each other for the same handful of Google clicks, paying more each month for less. Pierce owns the one channel they have not touched, in the one ZIP that matters to him, for $8.68 a lead. That is the whole difference: not a bigger budget, a better-built machine - and it is the exact machine the team at AI DOERS builds for home-service owners across the country. Real Grapevine 76051 results: 3,065 leads, $26,604 spent, $8.68 per lead.
DOERS · HVAC Performance MarketingMadhuranjan Kumar brings 20 years of performance-marketing experience and has managed over $200 million in Facebook ad spend for brands across the United States and beyond. His expertise spans the full modern marketing stack, Meta, Google Ads, TikTok, email automation, CRM, and the websites that hold it all together, and the full reach of a market, from worldwide brands to national chains to the local operator competing on their own street. At AI DOERS he turns that track record into lead-generation systems for home-service businesses, with first-party HVAC results consistently under $8 per lead. Pierce's Grapevine 76051 Thermostat / Smart Controls account on this page is one of those builds.
Start with a free audit of your ad account and a custom 30-day plan to drive your cost per lead down. No contract, and no retainer until the leads come in. In Grapevine 76051, an $8.68 lead looks like 3,065 booked Thermostat / Smart Controls jobs.